AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Lanscan windows 101/18/2024 Most Ethernet ports have link status and activity LED indicators, these are often solid indicate if an Ethernet link has been established and start flashing to indicate that there is network activity on the link (colors vary depending on the manufacturer).Įthernet switches have such LEDs and I believe there are LED indicators on the Ethernet port of the ATEM Mini as well. If you have an Ethernet cable connected and devices at either end of the cable powered on and you don't see any LED activity for that connection at either end, that is a good indication of some kind of problem at the Ethernet layer such as: bad port on the Ethernet switch, bad Ethernet port on the ATEM Mini, or bad network cable. If DHCP settings report an IP address of 0.0.0.0, that generally means that it could not obtain an IP address from the DHCP server. This could either be due to a hardware-level issue (as described above) or a problem with the router/DHCP server. If using a Static IP address, you'll want to make sure that you use the gateway IP address and network settings from your router. So for example, a gateway IP address of 192.168.1.1 may or may not be correct depending on your local network. Hi there - Whilst being a 'crack' when it comes to content creation, network setting are not my forte. Here is my "silly" question: I changed my Win 10 IP address to a static IP address as it seems that dynamic IPs may change the IP and make my computer no longer communicate with Streamdeck and/or ATEM Mini Pro. Now my understanding was that I would need all devices in the production chain to have the same IP number so they can communicate with each other. This may be a wrong assumption - as I dont seem to be be able to change the ATEM's IP number. SoftPerfect Network Scanner Powerful multipurpose network administration tool for Windows, macOS and Linux This fast, highly configurable IPv4/IPv6 scanner can streamline many of your network support procedures. I can only take ATEMS existing IP and add it to Companion so that Atem 'talks' to companion and Comapnion 'talks's to StreamDeck. now the Status on Campanion shows green OK, so thats great. But what happens if i want to broadcast live via the Ethernet connection that I have connected to a Switch (plugged in Router cable + ethernet to PC + Ethernet to Atem Mni Pro) - would I be able to still braodcast via Ethernet conencted to ATEM Mini Pro although the IP address of the ATEM-Comapnion connection is now not the same as the static IP address that I created in my Windows 10? Terribly confused. Generally speaking, every device on a local network has a unique IP address as the IP address is used to route network packets to a particular device. You will usually run into problems if you assign two devices on the same local network the same IP address. What is true about devices on a local network is that they need to be within the same local subnet IP address space in order to be able to communicate with each other without going through a router.
0 Comments
Read More
Leave a Reply. |